ERL L-PRO 4000, Руководство пользователя

Страница: 31 / 406

2 Setup and Communications
D02706R02.30 L-PRO 4000 User Manual 2-9
2.9 Using HyperTerminal to Access the Relay’s
Maintenance Menu
This section describes how to configure a standard Windows VT-100 terminal
program on the PC for use with the relay.
The computer must be connected to the relay via the front USB port 150.
The relay is accessed using a standard VT-100 terminal style program on the
computer, eliminating the need for specialized software. Any terminal program
that fully supports VT-100 emulation and provides z-modem file transfer ser-
vices can be used. HyperTerminal, which is included in Windows XP and is
also available separately as HyperTerminal PE, is used here as an example.
Configure the terminal program as described in Table 2.1:Terminal Program
Setup and link it to the appropriate serial port, modem or TCP/IP socket on the
computer.
To configure HyperTerminal follow these instructions:
In Windows 7 open HyperTerminal PE; in Windows XP go to
Start > All Programs > Accessories > Communications > HyperTerminal
If “Default Telnet Program?” windows pops up,
Check “Don’t ask me this question again”
Hit
No .
First time use of HyperTerminal will ask for “Location Information”.
Fill with appropriate information, e.g.:
“What country/region are you in now”
Choose “Canada”
Table 2.1: Terminal Program Setup
Baud rate Default fixed baud rate 115,200 N81 (no parity, 8 data bits, 1 stop bit).
Data bits 8
Parity None
Stop bits 1
Flow control Hardware or Software.
Hardware flow control is recommended. The relay automatically sup-
ports both on all its serial ports.
Function, arrow
and control keys Terminal keys
Emulation VT100
Font Use a font that supports line drawing (e.g. Terminal or MS Line Draw).
If the menu appears outlined in odd characters, the font selected is not
supporting line drawing characters.