ERL L-PRO 4000, Руководство пользователя

Страница: 122 / 406

6 Offliner Settings Software
6-6 L-PRO 4000 User Manual D02706R02.30
To undo the zoom on the graph, click the Refresh button.
Displaying Co-ordinates
At any time the user may right-click on the graph to display the co-ordinates of
the point the user selected.
6.4 Handling Backward Compatibility
Offliner Settings displays the version number in the second pane on the bottom
status bar. The settings version is a whole number (v1, v2, v3, v4, etc.).
The Offliner Settings is backward compatible; open and edit older settings files
and convert older settings files to a newer version. Offliner settings handles
forward conversion only — it converts an older setting file to a newer setting
file.
Converting a
Settings File
1. Open the setting file to convert.
2. In the
File menu, select Convert to Newer... and then select the version x
(where x is the newer version). A dialog box pops up prompting Offliner
for a new file name. Use either the same file name or enter a new file name.
The conversion process inserts default values for any newly added devices
in the new setting file. When the conversion is complete, Offliner Settings
displays the new file.
Figure 6.3: Converting Setting Files
Sending a New
Setting File to
the Relay
1. Make sure the settings version and the serial number of the relay in the set-
ting file match. The relay will reject the setting file if either the serial
number or the settings version do not match.
A “serial number discrepancy” message may appear. This is to en-
sure that the user is aware of the exact relay in which settings are
to be loaded. If this happens, check the relay serial number using
the terminal mode ID menu item. Type this serial number into the
L-PRO Serial No. box in the Identification tab display area of Offlin-
er Settings. Alternately the user may check the Ignore Serial Num-
ber check box to bypass serial number supervision.