QuadroCS Manual II: Administrator's Guide
Administrator's Menus
Quadro
CS
(SW Version 3.0.x)
7
The
LAN Settings
page contains information about the
Quadro host name, its IP address and the subnet mask on
the LAN side. These settings make the Quadro available to
the internal network.
The
System
Configuration
page contains of the following
components:
Host Name
requires a host name for the Quadro device.
IP Address
requires the Quadro host address for the LAN
interface.
Subnet Mask
requires Quadro host subnet mask.
Fig.0-5: System Configuration Wizard – System Configuration page
The Regional Settings are used to select settings specific to
the location of the Quadro. This is important for the
functionality of the voice subsystem.
The
Regional Settings
page consists of two drop down lists
to select the
Location
(country) and a corresponding
Timezone
and a manipulation radio button group to choose
the
GUI theme
of the web based configuration pages.
Fig. 1-5 System Configuration Wizard – Regional Settings page
