Epygi QUADRO CS, Руководство администратора

Страница: 44 / 51

QuadroCS Manual II: Administrator's Guide Administrator's Menus
Quadro
CS
(SW Version 3.0.x) 44
IP Pool
The Manage IP Pool Groups link opens the IP Pool Configuration page.
Fig. II-65: IP Pool Configuration page
The IP Pool table is the list of all created groups and the
members assigned to these groups. If a group is empty, EMPTY
will be indicated in the Members column. If hidden, group
members will still remain active but a HIDDEN will be displayed
in the Members column.
The IP Pool Configuration is used to create groups of IP
addresses, which have the same restriction criteria. Whenever
creating a new filtering rule groups may be used instead of
several IP addresses. It consists of the following components:
View makes hidden groups visible.
Hide makes group members hidden and adds the HIDDEN
comment in the member column.
Add opens the Add Group page where a new group may be
created. This page consists only of the New Group text field
(requiring the group name) and the standard Save and Back
buttons to apply or abort changes.
Edit opens the Edit Group page where the service parameters
can be modified. It consists of the same components as the Add
Group page. To operate with Edit , only one record may be
selected, otherwise an error will occur: “One row must be
selected”.
Please Note: Changing a group name will also change the
references to this group, including groups where this group is a
member of and all affected filter rules (enabled and disabled
ones, in all chains).
Clicking on the Group name will display an IP Pool Group
Configuration page with the Members list for the current
group.
Fig. II-66: Page to create a new IP Pool group
The IP Pool Group Configuration page displays a list of all
created member IP addresses for the selected group. It consists
of the following components:
Current Group provides read-only information about the current
group name the members are listed for.
Add opens the Add Member page where a new member may
be created.
Edit opens the Edit Members page where the service
parameters can be modified. This page includes the same
components as the
Add Member page. To operate with Edit ,
only one record may be selected, otherwise an error will occur:
“One row must be selected”.
Fig. II-67: IP Pool Group members list
The Add Members page consists of the following radio buttons:
IPaddress requires the member IP address that is to be added
to the group.
IP Subnet requires the subnet specified by the IP address and
the Maskbits. See above for more information about Maskbits .
The User-defined Group includes previously created groups
that may also be added as a member to another group.
Fig. II-68: Page to add a new member to the IP Pool group