Epygi QUADRO CS, Руководство администратора

Страница: 15 / 51

QuadroCS Manual II: Administrator's Guide Administrator's Menus
Quadro
CS
(SW Version 3.0.x) 15
The page Edit Event Settings offers the following input options:
Application displays the application the event refers to.
Multiple is shown here, if more than one event has been
selected for the action assignment.
Name displays the name of the event. Multiple is shown here, if
more than one event has been selected for the action
assignment.
Description displays additional information about the event.
Multiple is shown here, if more than one event has been
selected for the action assignment.
Action offers radio buttons to choose one of the actions to
notify the QuadroCS's administrator whenever the selected
event(s) takes place.
Fig. II-19: Edit Event Settings page
To Assign an Action to the Event
1. Select the checkbox of one or more events to assign an action to them.
2. Press the Edit button. The Edit Event Settings page appears.
3. Select an action type from the Action radio buttons to notify the administrator about the event in the desired way.
4. Press Save to submit the changes or use Back to abort the selected action.
Time/Date Settings
Time and Date Settings provide information about the current system time and date. The settings may be updated through the international time
and date servers.
Time is used to set the local time (hour, minute).
Date is used to set the date (month, day, year).
Timezone provides a selection of world time zones and is used
to select the local country time zone. Timezones are specified
by GMT (Greenwich Mean Time) and by specific timezones for
the United States and Canada.
Enable Simple Network Time Protocol Server enables the
SNTP (Simple Network Time Protocol) server on QuadroCS,
thus QuadroCS becomes the timeserver for its LAN.
Enable Simple Network Time Protocol Client enables the
SNTP client on the QuadroCS, thus QuadroCS becomes a client
to an external timeserver. The checkbox enables the following
parameters:
The SNTP Servers table lists all defined NTP Servers.
Add opens an Add NTP Server page where new NTP server
can be defined. The page contains the NTP Server radio
buttons that are used to choose between a manual or a
predefined NTP server.
Manual requires the NTP server’s FQDN (Full Qualified
Domain Name) or its IP address.
Predefined is used to select the NTP server IP address
from the drop down list, where the most common NTP
servers are listed.
Move Up and Move Down functional buttons are used to sort
NTP servers in the order they need to be accessed. If the NTP
server on the first position in the
SNTP Servers' table does not
answer, the NTP server on the next position then will try to be
reached.
Please Note: Add another NTP server to the list if you feel
defined NTP servers are not functional, i.e., the QuadroCS's
date/time is not being automatically updated.
Polling Interval indicates the time interval for the periodical
synchronization between timeserver and QuadroCS. It counts in
hours.
Fig. II-20: Time and Date Settings page
Fig. II-21: Time and Date Settings – Add Entry page
Attention: Time and Date Settings will be reset in case if QuadroCS has no battery or has lost power.