QuadroCS Manual II: Administrator's Guide
Administrator's Menus
Quadro
CS
(SW Version 3.0.x)
17
The second page of
Firmware update
consists of the
Browse
button used to browse the image file, and the
Specify Image
text field that will display the selected image filename.
Pressing
Save
will start uploading the image file to the board.
The next page will be displayed, showing the result of a
verification of the image being burned.
Fig. II-24 Firmware Update page 2
This page displays non-editable information about the image
validity. The
Image Check
will display invalid if the image does
not correspond to the hardware version.
The fields
Current Software Version
and
New Software
Version
show the old software version and the version of the
new image.
This page needs a confirmation to continue image updating. If
you are sure that the image version is appropriate for your
device press
Save
.
Fig. II-25: Firmware Check page