QuadroCS Manual II: Administrator's Guide
QuadroCS's Graphical Interface
Quadro
CS
(SW Version 3.0.x)
4
QuadroCS's Graphical Interface
Administrator’s Main Page
After logging in as an administrator, the
QuadroCS Management
page is displayed. Here the administrator may access the following settings and
perform the following actions:
1.
System Menu
•
System Configuration Wizard
•
Status
•
Configuration Management
•
Change Password
•
Events
•
Time/Date Settings
•
Mail Settings
•
Firmware Update
•
Networking Tools
•
Diagnostics
•
Upload Language Pack
2. Conference Management Menu
•
Conferences
•
SIP Settings
•
RTP Settings
•
NAT Traversal Settings
•
Statistics
•
Call Routing Table
•
Recording Common Settings
•
Mail Default Settings
3. Network Menu
•
DNS Settings
•
DHCP Settings
4.
Uplink Settings Menu
•
Firewall
•
Filtering Rules
•
Dynamic DNS Settings
Fig. II-1: Quadro Conference Server Administrator’s page
The functional button
Renew Wan IP Address
appears on the administrator’s main page
Quadro Conference Server Management
if the Quadro
Conference
Server
acts as a client to a DHCP server. The button
Renew WAN IP Address
is used to get a new WAN IP address, i.e., the Quadro
Conference Server moves to another network.
The button
Please Check Your Pending Events
will be displayed on the administrator’s main menu page if any new system events exist. The link
leads to the page where these new system events are listed.
The current version of the QuadroCS's firmware and
of its boot loader is shown in the lower right corner of
the administrator’s main menu, followed by the list of
Users currently logged into the system
. Information
about the IP address users accessed QuadroCS from,
the username of the logged-in user and the time until
the next automatic logout is provided here. The idle
session timeout is set to 20 minutes. If no action is
done during that time, the user automatically will be
moved to the login page and will be requested to login
again.
The
Refresh
link is on some pages in the lower right corner beside the field displaying the number of seconds left until the next refresh and is used
to perform a manual reload of the page.
