QuadroCS Manual II: Administrator's Guide
Administrator's Menus
Quadro
CS
(SW Version 3.0.x)
6
Administrator’s Menus
System Menu
Fig. II-2: QuadroCS Management page
Fig. II-3: QuadroCS Management tree
System Configuration Wizard
The
System Configuration Wizard
is a helpful tool for the administrator to define the Quadro Conference Server’s LAN and WAN settings, to
specify regional configuration settings and to make the Quadro operational in the global network. The
System
Configuration Wizard MUST be run
upon the first startup of the Quadro Conference Server
. The Wizard navigates through the following basic configuration parameters and settings:
•
LAN Settings
•
DHCP Settings
•
Regional Settings
•
WAN Settings
•
DNS Settings
For a step-by-step guide of different applications of the QuadroCS, refer to the Manual I - Installation Guide:
LAN DHCP Settings and DNS Settings are described in the chapters
below while LAN And WAN configuration settings and regional
settings will be described in this chapter.
Please Note:
It is strongly recommended that factory default
settings are left unchanged if their meanings are not fully clear
to the administrator.
Fig.0-4: System Configuration Wizard – start page
