Epson WorkForce 1100, Руководство по обслуживанию

Страница: 38 / 163

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100 Revision C
Troubleshooting Overview 38
Confidential
Table 3-6. Troubleshooting of Multi-feed error
Occurrence
Timing
Phenomenon Detail
Faulty Part/Part
Name
Check Point Remedy
Any time During manual double-sided
printing, multiple sheets are fed
at a time. ASF Assy 1. Check that the Retard Roller Assy is moving properly during the
feeding operation.
1. Attach the Extension Spring on the back side
of the Retard Roller Assy correctly.
Refer to Chapter 4 Retard Roller Assy
(P.101) .
2. Check that the position of the ASF Guide Roller LDs has been
adjusted correctly.
2. Adjust the position of the ASF Guide Roller
LDs.
Refer to Chapter 4 ASF Assy
(P.96) .
Extension Spring
Retard Roller
Assy
Bottom of
the ASF Assy
ASF Assy
Table 3-7. Troubleshooting of Ink Low
Occurrence
Timing
Phenomenon Detail
Faulty Part/Part
Name
Check Point Remedy
At operation or
during printing A message is displayed on the
LED and STM3 during printing. Ink Cartridge 1. Look at the remaining ink indication of the STM3 to check the
amount of the ink remaining in the Ink Cartridge.
1. Prepare a new Ink Cartridge.
Table 3-8. Troubleshooting of Ink Out Error
Occurrence
Timing
Phenomenon Detail
Faulty Part/Part
Name
Check Point Remedy
During printing After the Carriage has detected
the HP, an error is displayed on
the LED and STM3. Ink Cartridge 1. Look at the remaining ink indication of the STM3 to check
whether the ink remains in the Ink Cartridge.
1. Replace the Ink Cartridge with a new one.