Item
Description
Mirror
On
Select whether to flip horizontally (mirror) using the center of the Output
Size width as the basis line and then print (
On
) or print without flipping
horizontally (
Off
).
If an angle is specified for
Rotate
, the rotated result is flipped horizontally.
Off
*
Select Palette
Software
*
From the following selections, choose the palette that specifies the color
and thickness of the logical pen.
❏
Software
: Print according to the pen configurations set in the
application, and ignore the built-in palette of the printer.
❏
Default
: Print according to the settings of the built-in palette of the
printer specified in advance. The settings of the palette cannot be
changed. The built-in palette specifies a logical pen with a pen width
of 0.35 mm and 256 colors. For a sample of colors that correspond to
the color numbers, see the included "Color Palette.pdf".
"Color Palette.pdf" recommends checking a print result that was
printed with
Print Quality
set to
CAD / Line Drawing (Color)
in the
included printer driver.
❏
Palette A
/
Palette B
: The printer prints according to the settings of
the built-in palette that you specified for
Define Palette
. If
Define
Palette
setting is not set, the results are the same as when
Default
is
selected.
When
Default
/
Palette A
/
Palette B
is set, the pen configurations set in the
application are ignored.
Default
Palette A
Palette B
Define Palette
Palette A
*
You can define a unique built-in palette by specifying the pen width and
color for the 16 types of logical pen. There are two types of definable
built-in palettes:
Palette A
and
Palette B
. Select a palette to be defined,
select
Pen Number
, and then define the
Pen Width
and
Pen Color
for
each pen. For a sample of colors that correspond to the color numbers, see
the included "Color Palette.pdf".
"Color Palette.pdf" recommends checking a print result that was printed
with
Print Quality
set to
CAD / Line Drawing (Color)
in the included
printer driver.
Palette B
Line Merge
On
Select whether to merge the intersection of the overlapping lines within
the image according to the MC command of the data (
On
) / Move lines to
be printed later to the front at intersections (
Off
).
Off
*
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Using the Control Panel Menu
155
Содержание SC-T3200 Series
Страница 1: ...User s Guide CMP0015 00 EN ...
