❏
To avoid getting dirt on the ink supply port, store
the removed ink cartridge properly. The ink supply
port has a valve in it so it does not need to be capped.
❏
Removed ink cartridges may have ink around the
ink supply port, so be careful not to get any ink on
the surrounding area when removing the
cartridges.
❏
To maintain the quality of the print head, this
printer stops printing before ink cartridges are
completely expended.
❏
Although the ink cartridges may contain recycled
materials, this does not affect printer function or
performance.
❏
Do not dismantle or remodel ink cartridges. You
may not be able to print properly.
❏
Do not drop or knock ink cartridges against hard
objects; otherwise, the ink may leak.
Notes on handling paper
Note the following points when handling and storing
the paper. If the paper is not in good condition, print
quality may decline.
Check the documentation supplied with each paper.
Notes on Handling
❏
Use Epson special media under normal room
conditions (temperature: 15 to 25˚C, humidity: 40
to 60%).
❏
Do not fold the paper or scratch the surface of the
paper.
❏
Avoid touching the printable surface of the paper
with your bare hands. Moisture and oils from your
hands can affect print quality.
❏
Handle paper by the edges. We recommend
wearing cotton gloves.
❏
Changes in temperature and humidity may cause
paper to become wavy or curled. Check the
following points.
❏
Insert the paper just before printing.
❏
Do not use wavy or warped paper.
For roll paper, cut off any parts that are wavy or
curled, and then load the paper again.
For cut sheets, use new paper.
❏
Do not wet the paper.
❏
Do not throw away the paper packaging as you can
use it for storing the paper.
❏
Avoid locations that are subject to direct sunlight,
excessive heat, or humidity.
❏
Keep cut sheets in their original package after
opening, and keep them in a flat place.
❏
Remove roll paper that is not in use from the
printer. Rewind it correctly and then store it in the
original packaging that came with the roll paper. If
you leave the roll paper in the printer for a long
time, its quality may decline.
Notes on handling printed paper
To maintain long lasting, high quality print results, note
the following points.
❏
Do not rub or scratch the printed surface. If they are
rubbed or scratched, the ink may peel off.
❏
Do not touch the printed surface; Failure to observe
this precaution may cause ink to rub off.
❏
Make sure the print outs are completely dry before
folding of stacking; otherwise, the color may change
where they touch (leaves a mark). These marks will
disappear if they are separated immediately and
dried; however, they will remain if not separated.
❏
If you put the print outs in an album before they are
completely dry, they may be blurred.
❏
Do not use a dryer to dry the print outs.
❏
Avoid direct sunlight.
❏
Prevent color distortion while displaying or storing
the print outs by following the instructions in the
paper's documentation.
SC-P9000 Series/SC-P7000 Series/SC-P8000 Series/SC-P6000 Series User's Guide
Introduction
20
Содержание SC-P6000 Series
Страница 1: ...User s Guide CMP0044 01 EN ...