Epson SC-P6000 Series, Руководство пользователя

Страница: 129 / 198

E
Select the cleaning strength. To start, select
Normal .
Press the
u
/
d
buttons to select the strength, and
then press the
Z
button to start cleaning.
Head cleaning takes about 3 to 14 minutes.
Note:
The more color pairs selected, the longer it takes to
perform cleaning. Depending on the status of the
nozzles and the
Auto Clean Max Repeat setting,
this function can take up to 24 minutes.
A confirmation message is displayed when
cleaning is complete.
F
To print a check pattern and check the status of
the clogging, select
Nozzle Check , and then press
the
Z
button.
To exit without performing a nozzle check, select
Exit
, and then press the
Z
button.
If the nozzles are still clogged, repeat steps 1 to 5 several
times. If the nozzles are still clogged after repeating the
procedure several times in succession, repeat from step
1, and select
Heavy in step 5.
If the nozzles are still clogged after performing Heavy ,
see the following section and perform Powerful
Cleaning .
Powerful Cleaning
Before starting this procedure, be sure to read the
following:
U
“Notes on Head Cleaning” on page 127
A
Press the
r
button to display the setup menu.
B
Press the
d
/
u
buttons to select Administrator
Menu , and then press the
r
button.
C
Enter the administrator password, and then
press the
Z
button.
D
Press the
d
/
u
buttons to select Powerful
Cleaning , and then press the
r
button.
E
Select the nozzle arrays for Powerful Cleaning.
Press the
u
/
d
buttons and select the color pairs
with faint or missing segments in the check
pattern.
If there are faint or missing segments in all
colors
Select All Nozzles , and then press the
r
button.
If there are faint or missing segments in part of
the colors
Select the colors that need to be confirmed, and
then press the
Z
button to confirm. You can
select more than one at once. When you have
finished selecting, press the
r
button.
F
A confirmation dialog is displayed. Select Yes ,
and then press the
Z
button to start Powerful
Cleaning.
Powerful Cleaning takes about 4 to 16 minutes.
Note:
The more color pairs selected, the longer it takes to
perform cleaning. Also, depending on the status of
the nozzles, it can take up to about 27 minutes.
When Powerful Cleaning is complete, you are
returned to the screen displayed before cleaning
was performed.
G
Print a check pattern, and inspect the results to
determine if the problem has been resolved.
U
“From the printer” on page 126
Adjusting print misalignments
(Head Alignment)
If lines are misaligned or print results are grainy,
perform Head Alignment to adjust the print
misalignment.
The print head fires ink when moving to the left and to
the right while printing. Since there is a short distance
(gap) between the paper surface and the print head, a
print misalignment may occur due to the paper
thickness, changes in temperature or humidity, and
internal inertia while the print head moves.
Although Head Alignment can be performed from the
computer or the printer, the alignment procedures
differ as explained below.
SC-P9000 Series/SC-P7000 Series/SC-P8000 Series/SC-P6000 Series User's Guide
Maintenance
129