Code
Problem
Solution
201
The memory is full.
❏
Print received faxes from
Job Status
in
Job/
Status
.
❏
Delete received faxes saved in the inbox from
Job
Status
in
Job/Status
.
❏
If you are sending a monochrome fax to a single
destination, you can send it by using Direct Send.
❏
Divide your originals in two or more to send them
in several batches.
202
The line was disconnected by the recipient machine.
Wait for a while and then try again.
203
The product cannot detect the dial tone.
❏
Make sure that the phone cable is connected
correctly and the phone line is working.
❏
When the printer is connected to the PBX or the
terminal adapter, change the
Line Type
setting to
PBX
.
❏
Select
Settings
>
General Settings
>
Fax
Settings
>
Basic Settings
>
Dial Tone
Detection
, and then disable the dial tone setting.
204
The recipient machine is busy.
❏
Wait for a while and then try again.
❏
Check the recipient's fax number.
205
The recipient machine does not answer.
Wait for a while and then try again.
206
The phone cable is incorrectly connected to the LINE
and EXT. port of the product.
Check the connection of the LINE port and the EXT.
port of the printer.
207
The product is not connected to the phone line.
Connect the phone cable to the phone line.
208
The fax could not be sent to some of the specified
recipients.
Print a
Fax Log
or
Last Transmission
report for
previous faxes from
Fax Report
in the Fax menu to
check the failed destination. When the
Save Failure
Data
setting is enabled, you can resend a fax from
Job Status
in
Job/Status
.
301
There is not enough storage space available to save
the data in the memory device.
❏
Increase the storage space in the memory device.
❏
Reduce the number of documents.
❏
Lower the scanning resolution or increase the
compression ratio to reduce the size of the
scanned image.
302
The memory device is write-protected.
Disable write protection on the memory device.
303
No folder has been created to save the scanned
image.
Insert another memory device.
304
The memory device has been removed.
Reinsert the memory device.
305
An error occurred while saving the data to the
memory device.
If the external device is accessed from a computer,
wait for a while and then try again.
306
The memory is full.
Wait until other ongoing jobs are finished.
User's Guide
Solving Problems
192
Содержание C11CG69401
Страница 1: ...User s Guide NPD5896 02 EN ...