Settings item
Settings value
Explanation
Original Type
Text & Image
*
Select the type in accordance with the loaded original.
Tracing Paper
Recycled
Blueprint
Blueprint Inverted
Watercolor Rendering
Original Size
Auto Detect
-
The default setting of
Auto Detect
is recommended in most
situations. Note that, depending on the original, it may not be
possible to detect the width correctly even when the setting is
Auto
Detect
. Similarly, tracing paper and the optional carrier sheet are not
detected automatically. In such cases, change from the standard size
and specify a width of your choosing. If the desired size is not in the
options, then select User-Defined, and enter the length and width of
the original.
ISO A
Display supported sizes for
originals
US-ANSI
US-ARCH
JIS B
ISO B
User-Defined
Display the Original Size
Input screen
Top Offset
0.0 to 100.0mm (0.0
*
)
0.00 to 3.94inch (0.00
*
)
If you do not want to copy the top margin of the original, you can
adjust the top, and then copy the original. Enter the value for the
length from the top of where you want to start copying.
If the carrier sheet is loaded, set the value to 19 mm.
Image Quality
Contrast
-4 to 4 (0
*
)
Set the contrast. Negative values (-) are weaker and positive values (+)
are stronger.
Sharpness
-4 to 4 (0
*
)
Set the sharpness. Negative values (-) are weaker and positive values
(+) are stronger.
Remove
Background
-4 to 4 (0
*
)
Set the adjustment value for removing the background. Configure
this setting when you are scanning originals with colors or originals
that are thin or when removing unwanted backgrounds. Negative
values (-) are weaker and positive values (+) are stronger.
Bidirectional
On
*
Setting this to
On
causes the print head to print while moving both
left and right. Setting this to
Off
reduces ruled line misalignment, but
printing takes more time.
Off
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Using the Menu
172
Содержание C11CF85403
Страница 1: ...User s Guide CMP0155 08 EN ...
