Epson C11CF85403, Руководство пользователя

Страница: 149 / 242

Settings item Settings value Explanation
Paper Suction -4 to +3 It is important to choose the appropriate amount of suction for the paper
used in order to maintain the correct distance between the paper and print
head. Choosing too high a value for thin or soft paper will increase the
distance between the paper and print head too much, causing print quality
to decline or preventing the paper feeding correctly. In such cases, you will
need to lower the paper suction. The lower the setting value, the weaker the
suction power.
Back Tension
Auto
* If there is any wrinkling on the paper during printing, select High or Extra
High .
When this is set to Extra High , the following setting is enabled.
Settings - General Settings - Printer Settings - Paper Source Settings -
Roll Paper Setup - Back Tension 2
Standard
High
Extra High
Drying Time
Drying Time per
Pass 0.0 to 10.0 seconds
(0.0
*
)
Select the time the print head pauses to allow drying after each pass.
Choose from values between 0.0 and 10.0 seconds. Depending on the paper
type, the ink may take a while to dry. If the ink blurs on the paper, set a longer
time for drying the ink. Increasing the drying time increases the time
needed to print.
Drying Time per
Page 0.0 to 60 minutes
(0.0
*
)
Specify how long the printer pauses to allow the ink to dry after printing
each page; choose from values between 0 and 60 minutes. Depending on
the ink density or paper type, the ink may take a while to dry. If the ink blurs
on the paper, set a longer time for drying the ink. The longer the drying time,
the more time required for printing.
Paper Size Check
On
*
Select whether to detect (On) or not detect (Off) the paper width when
paper is loaded. Try choosing Off if a paper setting error is displayed even
though the paper is correctly loaded. Note, however, that the printer may
print outside the paper when Off is selected. If it prints beyond the edges of
the paper, the inside of the printer becomes dirty with ink. We generally
recommend using the printer with this set to On.
The changes are applied after the paper is reloaded. Note that they are not
applied if you just change the menu items.
Off
Auto Cut
On
*
Select whether to automatically cut (On) or not cut (Off) using the built-in
cutter as each page is printed on roll paper. Set On to automatically cut the
edge if it is not a horizontal cut when paper is loaded.
The setting selected with the printer driver takes priority when the printer
driver is used.
U
“Cutting the Roll Paper” on page 38
Off
Remove Skew
On
*
Select whether to enable (On) or disable (Off) paper skew reduction.
Off
Restore Default Restore the selected Custom Paper settings to default settings.
Printing Language
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Using the Menu
149