Settings item
Settings value
Explanation
Error Notice
Paper Size Notice
On
Setting this to
On
will display an error message when the output size or
paper type settings of print jobs sent to the printer differ from those settings
in the printer.
Off
*
Paper Type Notice
On
Off
*
Roll Paper Setup
Detect Paper Me‐
andering
On
*
If On is selected, an error will be displayed in the control panel and printing
will stop if the paper is skewed; select Off to disable this feature. On is
recommended in most circumstances as skewed paper may cause the
printer to jam.
Off
Print Cutting
Guideline
On
If Auto Cut is Off, you can choose to print (On) or not print (Off) cut lines on
roll paper. Cut lines are not printed if Auto Cut is On or when cut sheets are
used.
Note, however, that if the roll width selected with the computer is narrower
than the paper loaded in the printer, cut lines will be printed regardless of
the option selected for Auto Cut.
The setting selected with the printer driver takes priority when the printer
driver is used.
Off
*
Cut for Borderless
Print
Two Cuts
*
Select whether to insert a margin and cut twice between pages (Two Cuts)
or cut once between pages (One Cut) when printing multiple pages with
borderless printing.
The setting selected with the printer driver takes priority when the printer
driver is used.
U
“About Roll Paper Cutting” on page 73
One Cut
Quick Cut
On
*
Specify the cutting operation for printing multiple page jobs.
Setting this to
On
will cut the preceding printout when its trailing edge
reaches the cutting position while the next job is being printed. This
shortens the printing time because printing and cutting are done in
tandem.
The details of the cutting operation are the same as
One Cut
of
Cut for
Borderless Print
or
Single Cut
of the printer driver.
U
“About Roll Paper Cutting” on page 73
Setting this to
Off
will start the next print job after the preceding print job is
fed to its cutting position and cutting is completed.
Off
Cut Mode
Normal
*
If you want to reduce operation noise during cutting, set
Quiet
. If
Quiet
is
set, the cutting speed is reduced.
Quiet
Margin Refresh
On
*
Select whether to automatically cut (On) or not cut (Off) the leading edge in
order to remove ink stains that may have been left by previous borderless
printing before printing with borders.
Off
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Using the Menu
146
Содержание C11CF85403
Страница 1: ...User s Guide CMP0155 08 EN ...
