Sleep Timer
6min
*
By default, the printer enters Sleep mode in six
minutes of inactivity starting from the moment it
entered Low Power mode. You can change the
Sleep
Timer
setting within a range from 6 to 11 minutes.
6min
-
11min
*
Factory default menu setting
Select
1min
(default) for
Low Power Timer
if your printer shares an electrical circuit with your room
lights and you notice them flickering. Otherwise, select a high value to keep your printer available for
frequent use with the minimum warm-up time.
The printer automatically exits a power saver mode when it receives a print job from a computer or fax
data through the telephone line. Alternatively, you can manually bring it back to the ready-to-print
state. Press any button on the operator panel in Low Power mode. In Sleep mode, press the
(
Energy
Saver
) button. Whether the printer is in Low Power or Sleep mode, it will take about 25 seconds for
the printer to resume the ready-to-print state.
Auto Reset
Purpose:
To specify a time period before the printer restores the default setting for the current menu item and
resumes the ready-to-print state when an attempt to change the setting is left unfinished.
Values:
45sec
*
1min
2min
3min
4min
*
Factory default menu setting
Fault Time-Out
Purpose:
To specify a time period before the printer cancels a job that has halted abnormally. Any job will be
cancelled when it times out.
Values:
AL-MX200 Series User’s Guide
Using the Operator Panel Menus and Keypad
293
