Epson AcuLaser M8000 Series, Руководство пользователя

Страница: 100 / 248

The required time to process the print data exceeded the print engine speed because the current page
is too complex. Press the
Start/Stop button to resume printing, or press the
+
Cancel Job button
to cancel the print job. If this message appears again, select
On
as the
Page Protect
setting in the
control panel’s
Setup Menu
or select Avoid Page Error on the printer driver.
If you continue to receive this message when printing a particular page, try simplifying the page by
limiting the number of graphics or reducing the number and size of fonts.
To avoid this error, it is recommended that you set the
Page Protect
setting to
On
and add more
memory to the printer. See “Setup Menu” on page 72 and “Memory Module” on page 131 for details.
PS3 CompactFlash Full
The memory allocated for writing PostScript 3 commands on the optional CompactFlash memory
is full.
To clear this error, select
Clear Warning
from the control panel’s
Reset Menu
. For instruction
about accessing the control panel menus, see “How to access the control panel menus” on page 64.
RAM CHECK
The printer is checking the RAM.
Ready
The printer is ready to receive data and print.
Replace Feed Roller C2, Replace Feed Roller C3, Replace Feed Roller C4
The feed roller C2, C3, or C4 has reached the end of its service life and needs to be replaced. If this
error occurs, consult your dealer.
Replace Fuser
The fuser has reached the end of its service life and needs to be replaced. If this error occurs, consult
your dealer.
Replace Maintenance Unit
The maintenance unit has reached the end of its service life and needs to be replaced. If this error
occurs, consult your dealer.
Replace Toner Cartridge
EPSON AcuLaser M8000 Series User's Guide
Using the Control Panel 100