SDI2USB 3.0 User Guide
Add a waterm ark
3. Choose a tim estam p form at from the Form at drop down box.
4. If desired, change the color and out line color from the default white and gray values.
5. Click on a location in the Position grid to specify the location of the tim estam p.
6. Change the Font type and size by clicking the elipsis (...) next to the Font description; a font
selection dialog opens.
7. When you are done configuring, click Apply to see the changes while keeping the dialog open for
futher tweaks, or click OK to apply your changes and close the dialog.
Note that you can include both a tim estam p and a static text waterm ark.
Add a static text waterm ark
You can add static text to your captured video by adding your text and selecting the font, size, location
and color.
Start by connecting your video grabber to the capture workstation and your source to the video grabber.
Launch the capture tool and configure it for recording video following the instructions in
, if
needed.
To configure a static text waterm ark:
1. From the Tools » Opt ions dialog, select the On-Screen Text tab.
2. Check the St at ic t ext checkbox.
57