SDI2USB 3.0 User Guide
Additional features
Additional features
This section describes additional features that help you get the m ost of out of capture experience.
Status bar
The Epiphan Capture Tool has a status bar that displays inform ation about your SDI2USB 3.0 or the
currently selected video grabber. See below for a review of different things added to the status bar
depending on configuration settings and your current actions with the utility.
No grabbers
If the software doesn't detect any attached video grabbers, the status bar indicates there are no capture
devices found:
No signal on selected grabber
If there is no signal to the currently selected video grabber, the status bar indicates this with a no signal
m essage:
Ready but not recording
Otherwise, the status bar shows a wealth of inform ation. When not actively recording, the status bar
indicates that it is Ready to start recording, and shows the VGA Mode of the source signal at the right side
of the bar.
Recording a video
In the default configuration, when actively recording a video, it looks like this (RECORDING tag, file
location, duration and fram e count are added to the status):
45