Environnement AS32M, Техническое руководство, Страница: 90 / 186

Environnement
S.A
AS32M
Duplication prohibited
DECEMBER 2013
3–52
The
Test
column is used to test the five analog outputs and to adjust the number of points.
For a range 1:

0 point (lower scale of output)  0 volt obtained at output,

4000 points (higher scale of output)  1 volt obtained at output.
F6 key [ 4000 ] enables to force the full scale on the whole analog outputs.
Function « Analog inputs »:
Each ESTEL board has 4 analog inputs: this screen is used to program characteristics of these analog
inputs.

Name
fields are used to enter a name of 8 alphanumeric digits.

Unit
fields are used to select the unit by : none, ppt, ppb, ppm, μ g/m
3
, mg/m
3
, gr/m
3
, μ g/Nm
3
,
mg/Nm
3
, gr/Nm
3
, μ g/Sm
3
, mg/Sm
3
, gr/Sm
3
, %, μ gr, mgr, gr, mV, U, °C, °K, hPa, mb, b,l, Nl, Sl, m
3
,
l/min, NI/min, Sl/min, m
3
/h, Nm
3
/h, Sm
3
/h, m/s or km/h, in the toggle menu.

The
Ax + B
fields enable to enter the linearization curve of each parameter.