Environnement AS32M, Техническое руководство, Страница: 42 / 186

Environnement
S.A
AS32M
Duplication prohibited
AUGUST 2013
3–4
3 OPERATING INSTRUCTIONS
The information given in Figure 3-1 and Table 3-1 are necessary for the users to install the unit.
(5) DB25 connector, (6) Ethernet output, (7) DB37 connector, (8) main power supply
Figure 3-1 – Electrical connections of AS32M
Table 3-1 – DB37 and DB25 connector links
RS-232/422 serial links
COM1 COM2
2 – TX 14 – TX
3 – RX 16 – RX
4 – RTS 7 – GND
7 – GND
20 – DTR
21 – TX
11 – RX
ESTEL board(s)
PIN N° CONNECTION PIN N° CONNECTION
1 ANALOG OUTPUT 1 17 REMOTE CONTROL 3
2 ANALOG OUTPUT 2 18 REMOTE CONTROL 4
3 ANALOG OUTPUT 3 19 +5VCC
4 ANALOG OUTPUT 4 20 ANALOG OUTPUT GROUND
5 ANALOG INPUT 1 21 ANALOG OUTPUT GROUND
6 ANALOG INPUT 2 22 ANALOG OUTPUT GROUND
7 ANALOG INPUT 3 23 ANALOG OUTPUT GROUND
8 ANALOG INPUT 4 24 ANALOG INPUT GROUND
9-28 RELAY 6 CONTACT 25 ANALOG INPUT GROUND
10-29 RELAY 5 CONTACT 26 ANALOG INPUT GROUND
11-30 RELAY 4 CONTACT 27 ANALOG INPUT GROUND
12-31 RELAY 3 CONTACT 34 REMOTE CONTROL GROUND
13-32 RELAY 2 CONTACT 35 REMOTE CONTROL GROUND
14-33 RELAY 1 CONTACT 36 REMOTE CONTROL GROUND
15 REMOTE CONTROL 1 37 REMOTE CONTROL GROUND
16 REMOTE CONTROL 2
NOTE :
Output relay contacts are normally open and electric potential free. Remote controls are
made by closing electric potential free dry contacts. Analog inputs accept a maximum of
2.5 VCC