204
dataPAC User’s Guide
Chapter 5 - Balancing Measurements
To save or load settings
You can save settings for future use, or load previously saved settings. For example, if you
have more than one phone number that you dial in to, you can save time by storing settings
for each. The default settings are the ones that appear the first time you start Remote
Transfer. You can save over the Default settings to create your own default. To save or load
settings, follow these steps.
1.
When all settings are filled in, choose <F4> Save Settings.
2.
You can either save the settings as Default, or save the settings under a new name. To
save under a new name, press the arrow keys to highlight Save As, then press
<SELECT>.
3.
Enter the name in the Save Settings Screen.
4.
Press <DONE> to save the settings.
To load previously saved settings, follow these steps.
1.
Press <F3> (Load Settings).
2.
Use the arrow keys to select a name from the list. Press <SELECT>.
3.
Press <SELECT> with the Done button highlighted. The settings will appear in the
Remote Transfer screen.
Unloading Balancing Files to the Host Computer
From the host computer
1.
Start the dataPAC Utility Program by pointing to it on the Start menu.
2.
Choose the Serve Collector tab.
3.
Under Communications, choose Modem. You can choose Setup to make sure the
modem is setup correctly.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
