SB300 FOSB FOR 300 MM WAFERS
5
User Manual | Entegris, Inc.
ASSEMBLY INSTRUCTIONS
—
SB300 FOSB OPTIONS
Side Handles
INSTALLING 30-DEGREE HANDLES:
1. Locate the snap detail on the side handle,
part number SP300-0900.
2. Place the side handle so both the snap detail and
the leading tab of the handle are under the shell
support loops.
3. While supporting the front of the SB300 FOSB,
push the handle further into the shell support
loops until the snap detail has locked into position.
INSTALLING 90-DEGREE HANDLES (FIGURE 4):
1. Locate the snap detail on the side handle.
2. Place the side handle against the SB300 FOSB
so that the snap detail at the base of the handle
is under the lower (KC plate side) support loop.
3. Move the handle downward so that the snap
detail at the top of the handle is under the upper
support loop.
4. Move the handle upward until the snap detail at
both top and bottom of the handle are locked
into position.
Info Pad
INSTALLING THE INFO PADS (FIGURE 5):
1. Locate the “flat” side of the info pad, part number
01-031822.
2. Align the flat portion of the info pad with the flat
portion on the KC plate info pad hole.
3. Place the snap features into the desired info pad
hole and push the info pad into position until an
audible “snap” is heard. The info pad will sit flush
with the surface of the KC plate after installation.
Figure 4. 90° handle
Figure 5. Info pads
