Integrated Synchronous Servo Drives
HBI 22xx / HBI 26xx / HBI 32xx / HBI 37xx
Operating Manual Rev. 1.6
www.engelantriebe.de
page 3
1
Safety information and instructions for use
Attention !
The safety instructions must be observed!
Non-observance of the safety instructions can result in personal injury and property
damage.
During the installation, commissioning and maintenance, the applicable safety and
accident prevention regulations must be observed for the specific application.
The earth conductor must be connected first for the installation.
The device applies as electronic equipment and is intended for operation in machines.
The safety instructions of the Machinery Directive (89/392/EEC) must be observed.
Prior to commissioning, it must be ensured that no dangers may emanate from the drive
and that uncontrolled movements cannot occur.
Do not insert or pull out plug connectors with voltage applied!
The following regulations apply without a claim to completeness:
VDE 0100
Regulations for the erection of high-voltage systems up to 1000 volt
VDE 0113
Electrical systems with electronic equipment
VDE 0160
Equipment of high-voltage systems with electronic equipment
