Enerpac EBC20B, Инструкция

Страница: 1 / 28

1
L4316 Rev. D 05/21 EN
1.0 SAFETY
1.1 Introduction
Read all instructions carefully. Follow all recommended
safety precautions to avoid personal injury as well
as damage to the product and/or damage to other
property. Enerpac cannot be responsible for any
damage or injury from unsafe use, lack of maintenance
or incorrect operation. Do not remove warning labels,
tags, or decals. In the event any questions or concerns
arise, contact Enerpac or a local Enerpac distributor for
clarification.
If you have never been trained on cutting tool safety,
consult your distributor or service center for information
about an Enerpac safety course.
This manual follows a system of safety alert symbols,
signal words and safety messages to warn the user of
specific hazards. Failure to comply with these warnings
could result in death or serious personal injury, as well
as damage to the equipment or other property.
The Safety Alert Symbol appears
throughout this manual. It is used to alert
you to potential physical injury hazards.
Pay close attention to Safety Alert Symbols and obey all
safety messages that follow this symbol to avoid the
possibility of death or serious personal injury.
Safety Alert Symbols are used in conjunction with certain
Signal Words that call attention to safety messages or
property damage messages and designate a degree or
level of hazard seriousness. The Signal Words used in
this manual are DANGER, WARNING, CAUTION and
NOTICE.
NOTICE:
DANGER
Indicates a hazardous situation that,
if not avoided, will result in death or
serious personal injury
NOTICE:
WARNING
Indicates a hazardous situation that,
if not avoided, could result in death
or serious personal injury.
NOTICE:
CAUTION
Indicates a hazardous situation that,
if not avoided, could result in minor
or moderate personal injury.
NOTICE
Indicates information considered
important, but not hazard related
(e.g. messages relating to property
damage). Please note that the Safety
Alert symbol will not be used with this
signal word.
POWERFUL SOLUTIONS. GLOBAL FORCE.
Instruction Sheet
Cordless Bar Cutter
Models EBC20B and EBC20E
INDEX
1.0 SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.0 PRODUCT DATA . . . . . . . . . . . . . . . . . . . . . . 6
3.0 CONFORMANCE TO NATIONAL AND
INTERNATIONAL STANDARDS . . . . . . . . . . . 8
4.0 DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . 8
5.0 RECEIVING INSTRUCTIONS . . . . . . . . . . . . . 8
6.0 SET-UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
7.0 BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
8.0 FEATURES AND CONTROLS . . . . . . . . . . . 11
9.0 CUTTER OPERATION . . . . . . . . . . . . . . . . . 13
10.0 MAINTENANCE . . . . . . . . . . . . . . . . . . . . . 16
11.0 CLEANING THE PISTON AREA . . . . . . . . . 22
12.0 STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . 23
13.0 TROUBLESHOOTING . . . . . . . . . . . . . . . . 23