Enerpac EBC20B, Инструкция

Страница: 8 / 28

8
2.6 Dimensions
Dimension in mm
C
A
B
A 19.8 504
B 6.9 176
C 13.9 354
Product specifications are subject to change without notice.
3.0 CONFORMANCE TO NATIONAL AND
INTERNATIONAL STANDARDS
Enerpac declares that this product has been
tested and conforms to applicable standards
and is compatible with all CE requirements.
A copy of an EU Declaration of Conformity is
enclosed with each shipment of this product.
4.0 DESCRIPTION
The Enerpac cordless bar cutters, models EBC20B and
EBC20E, are designed to cut round, square or flat metal
bars and other similar items.
These cutters contain t
wo blades, one fixed and one
moving. The moving blade is actuated by a hydraulic
cylinder.
Power is supplied by an 18 or 20 volt lithium-ion battery
(varies by region). The battery powers a DC electric
motor, which drives a small hydraulic gear pump. The
pump provides oil flow to the hydraulic cylinder, which
advances the cylinder piston.
A hydraulic reservoir with built-in rubber diaphragm
provides a constant supply of oil to the pump, regardless
of tool orientation or the amount of piston extension.
A trigger-style on-off switch, mounted on the cutter grip,
starts and stops the electric motor. The trigger must
remain pressed during the cutting process.
An automatic retract feature moves the piston to the
fully retracted “home” position when the piston reaches
its full stroke and the trigger is released.
A built-in blade safety guard provides protection from
splintered material during cutting and helps prevent
contact with the blades.
The rotatable cutting head can be turned 360 degrees,
allowing it to be positioned as needed for added
convenience.
See Figure 1 for a description of cutter major features
and components. Refer to Sections 2.1 through
2.6 of this manual for maximum cutting capacities,
specifications and dimensions.
5.0 RECEIVING INSTRUCTIONS
Visually inspect all components for shipping damage.
Shipping damage is not covered by warranty. If shipping
damage is found, notify carrier at once. The carrier
is responsible for all repair and replacement costs
resulting from damage in shipment.
5.1 Documents and Accessories
The following documents and accessories are included
with the cutter:
• Instruction Sheet
• Declaration of Conformity
• Protective Storage Case
• Allen Wrench – 8 mm
• 2 x Battery 20V-5Ah (Model EBC20B only)
• 2 x Battery 18V-5Ah (Model EBC20E only)
• Charger, 115V (Model EBC20B only)
• Charger, 230V (Model EBC20E only)