Enerpac EBC20B, Инструкция

Страница: 11 / 28

11
8.0 FEATURES AND CONTROLS
8.1 Cutting Head Position
The cutting head can be rotated 360 degrees to aid in
the positioning of the cutting blades and to allow greater
flexibility and safety for the operator.
Adjust the cutting head as described in the following
steps. Refer to Figures 5 and 6.
1. To prevent accidental startup, be sure that battery is
removed from tool.
2. Firmly grasp the grip/handle with one hand.
3. With your other hand, firmly grasp the positioning
handle and rotate the cutting head, twisting it in either
direction, until the desired cutting head position is
achieved.
Always position the cutting head so that the blades are
at a right angle (90 degrees) to the bar or other item
being cut. Refer to Section 9.5 for additional information.
2
1
Figure 5, Cutting Head Rotation
Key:
1. Positioning Handle
2. Grip/Handle
Figure 6, Cutting Head Positions