Enerpac EBC20B, Инструкция

Страница: 6 / 28

6
clips, coins, keys, nails, screws or other small
metal objects, that can make a connection
from one terminal to another. Shorting the
BATTERY terminals together may cause burns or
a fire.
d) Under abusive conditions, liquid may be
ejected from the BATTERY; avoid contact. If
contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the BATTERY
may cause irritation or burns.
e) Do not use a BATTERY pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behavior
resulting in fire, EXPLOSION or risk of injury.
f) Do not expose a BATTERY pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 130 °C may cause explosion.
g) Follow all charging instructions and do
not charge the BATTERY pack or tool
outside the temperature range specified in
the instructions. Charging improperly or at
temperatures outside the specified range may
damage the BATTERY and increase the risk of
fire.
6) Service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
b) Never service damaged BATTERY packs.
Service of BATTERY packs should only be
performed by the manufacturer or authorized
service providers.
e) Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool’s operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
h Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow
for safe handling and control of the tool in
unexpected situations.
5) BATTERY tool use and care
a) Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of BATTERY pack may create a risk of
fire when used with another BATTERY pack.
b) Use power tools only with specifically
designated BATTERY packs. Use of any other
BATTERY packs may create a risk of injury and
fire.
c) When BATTERY pack is not in use, keep it
away from other metal objects, like paper
2.0 PRODUCT DATA
2.1 Cutter Maximum Capacities
Material to be Cut
Cutter
Model
No.
Material Maximum
Diameter
Material Maximum
Tensile Strength
Material Maximum
Hardness
in mm psi daN/mm
2
Rockwell C
Round, square or
flat metal bars
EBC20B
EBC20E
0.79 20 94,275 65 43
NOTICE
Material to be cut must not exceed any of the stated maximum limits shown in this table.
Cutter may stall during operation if one or more of the maximum limits is exceeded.
2.2 General Specifications
Cutter
Model
Number
Max. Cutting
Force
Weight
(without battery)
Max. Hydraulic
Operating
Pressure
Ambient
Operating Temp
Hyd.
Pump
Tons kN lb Kg psi bar °F °C Type
EBC20B
EBC20E
21.2 188.3 19.2 8.7 7977 550
- 40
to
+ 122
- 40
to
+ 50
Internal,
Battery
Powered