4
IMPORTANT INFORMATION:
SAFETY KEY
The safety key must be inserted into the slot on the console and pushed all the way up in order to operate the
treadmill. Always insert the safety key and attach the clip to your clothing at your waist before beginning your
workout. If you should encounter problems and need to stop the motor quickly, simply pull down the safety key
to shut down the power. To continue the operation, please turn off the power switch, wait a few seconds and
switch it on again, insert the safety key and push up to the end.
ENGLISH / METRIC CONVERSION
The treadmill computer display can show METRIC and ENGLISH information. This should be preset for your
area by the factory. However, in case the treadmill needs to be converted between METRIC and ENGLISH
readout, please follow the procedure below:
Set the POWER SWITCH to ON. Press the START button on the computer and hold it. Insert the SAFETY KEY
then release the START button. The computer will sound one short beep. Press the START button to switch
between ENGLISH and METRIC and press STOP/ENTER button to confirm the setting. The computer will
sound a long beep and will return to the POWER ON mode with the new setting.
POWER ON
Set the POWER SWITCH, located on the base frame, to ON and insert the SAFETY KEY. All LED windows
light up with a short beep sound. “U1” displays in the SPEED PROFILE window, SPEED/CALORIES displays
the user weight factory setting value of “68”kg, TIME/DISTANCE displays the user height factory setting value of
“170”cm, and PULSE/INCLINE displays the user age factory setting value “35”. If there is any user information
that has been input and saved, all LED windows will display the information from the last input user information.
If no further button inputs are made within 3 minutes, the computer will enter the SLEEP MODE. Press any
button to return to the POWER ON mode.
SLEEP MODE
When the power is ON the computer will automatically enter SLEEP MODE if it is left idle for 3 minutes without
receiving any input. Press any button to return to POWER ON status when the computer is in the SLEEP
MODE.
OPERATING INSTRUCTIONS:
QUICK START
When the treadmill is in POWER ON status, press the START button to activate the QUICK START program.
The SPEED LED will count down 3 seconds with 3 short beep sounds then start from 0.8 km/h. Press the
SPEED UP/DOWN buttons to change the speed. Press the INCLINE UP/DOWN buttons to elevate the
treadmill. The TIME, CALORIES and DISTANCE will count up from 0.
PAUSE / STOP
During the workout press the STOP/ENTER button once to pause the treadmill. Press the STOP/ENTER button
twice to delete all workout data and return to POWER ON status.
COOL DOWN
After completion of each program the TIME LED window will show “COOL” and blink then start a one-minute
cool down procedure. Time counts down from 01:00 to 00:00 and speed stays at 3.2 km/h and the incline level
stays at level 0. After the time counts down to 00:00 the belt stops and returns to PAUSE/STOP status. Press
the STOP/ENTER button to return to POWER ON status. To escape the cool down procedure press the
STOP/ENTER button once anytime during the process to enter the PAUSE/STOP status and press the
STOP/ENTER button again to enter the POWER ON status.
