Endress+Hauser Proline t-mass A 150, Руководство по эксплуатации, Страница: 86 / 134

Diagnostics and troubleshooting Proline t-mass A 150 HART
86 Hauser
Options Description
Logbook entry only The device continues to measure. The diagnostic message is entered in the Event
logbook (events list) submenu only and is not displayed in alternation with the measured
value display.
Off The diagnostic event is ignored, and no diagnostic message is generated or entered.
12.5 Overview of diagnostic information
Diagnosti
c number
Short text Remedy information
Status
signal
from the
factory
Diagnostic behavior
from the factory
Diagnostics for the sensor
004 Sensor Change sensor F Alarm
*
082 Data storage 1. Change main electronic module.
2. Change sensor. F Alarm *
083 Memory content 1. Restart device.
2. Restore data.
3. Change sensor. F Alarm *
Diagnosti
c number
Short text Remedy information
Status
signal
from the
factory
Diagnostic behavior
from the factory
Diagnostics for the electronics
270 Main electronic failure Change main electronic module. F Alarm
271 Main electronic failure 1. Restart device.
2. Change main electronic module.
F Alarm
272 Main electronic failure 1. Restart device.
2. Contact service.
F Alarm *
273 Main electronic failure 1. Emergency operation via display.
2. Change main electronics.
F Alarm *
282 Data storage 1. Restart device.
2. Contact service. F Alarm
283 Memory content 1. Transfer data or reset device.
2. Contact service. F Alarm
*
311 Electronic failure 1. Transfer data or reset device.
2. Contact service. F Alarm *
311 Electronic failure Maintenance required!
1. Do not perform reset.
2. Contact service. M Warning
* Diagnostic behavior can be changed: Section 12.4 "Adapting the diagnostic behavior"
Diagnosti
c number
Short text Remedy information
Status
signal
from the
factory
Diagnostic behavior
from the factory
Diagnostics for the configuration