Endress+Hauser Proline t-mass A 150, Руководство по эксплуатации, Страница: 69 / 134

Proline t-mass A 150 HART Commissioning
Hauser 69
Decimal places 4 Select the number of
decimal places for the
display value. x
x.x
x.xx
x.xxx
x.xxxx x.xx
Display interval Set time measured values
are shown on display if
display alternates
between values. 1 to 10 5
Display damping Set the reaction time of
the local display to
fluctuations in the
measured value. 0.0 to 999.9 0
Header Select header contents on
local display. Device tag
Free text Device tag
Header text Select text for header on
local display. Free text –
Separator Select decimal separator
for displaying numerical
values. .
, .
10.6 Configuration management
After commissioning, you can save the current device configuration, copy it to another
measuring point or restore the previous device configuration.
You can do so using the
Configuration management parameter and the related options
found in the Conf. backup display submenu.
Navigation path
"Setup" menu → Advanced setup → Conf. backup disp.
While this action is in progress, the configuration cannot be edited via the local
display and a message on the processing status appears on the display.
Structure of the submenu
Conf. backup disp. →
Operating time
Last backup
Configuration management
Comparison result
Parameter overview with brief description
Parameter Description Selection/
Display
Factory setting
Operating time Indicates how long the
device has been in
operation up to this point. Days (d), hours (h),
minutes (m), seconds (s) -
Last backup Indicates when the last
data backup was saved to
the display module Days (d), hours (h),
minutes (m), seconds (s) -