Proline t-mass 65 PROFIBUS DP/PA
Trouble-shooting
Hauser
97
070
S: SENSOR DEFECT
$
: # 070
0x13
BAD
Sensor fail-
ure
Constant
Sensor failure
Cause:
Flow sensors are likely to be defect, measure-
ment is no longer possible.
Remedy:
Contact your Hauser sales center.
No. # 1xx
Software error
111
S: CHECKSUM TOTAL
$
: # 111
0x0F
BAD
Device Fail-
ure
Constant
Totalizer check-
sum error
Cause:
Totalizer checksum error
Remedy:
1. Restart the measuring device
2. Replace the amplifier board if necessary.
121
S: A/C SW COMPATI.
$
: # 121
0x0F
BAD
Device Fail-
ure
Constant
Amp- I/O soft
only part. comp.
Cause:
Due to different software versions, I/O board
and amplifier board are only partially compati-
ble (possibly restricted functionality).
!
Note!
– This message is only listed in the error his-
tory.
– Nothing is displayed on the display.
Remedy:
Module with lower software version has either
to be actualized by FieldCare with the required
software version or the module has to be
replaced.
No. # 2xx
Error in DAT/no communication
205
S: LOAD T-DAT
!: # 205
0x0F
BAD
Device Fail-
ure
Constant
Save to T-DAT
failed
Cause:
Data backup (downloading) to HistoROM/T-
DAT failed, or error when accessing (uploading)
the calibration values stored in the HistoROM/
T-DAT.
Remedy:
1. Check whether the HistoROM/T-DAT is
correctly plugged into the amplifier board.
2. Replace the HistoROM/T-DAT if it is defec-
tive.
102,
Before replacing the DAT, check that the
new, replacement DAT is compatible with
the measuring electronics. Check the:
– Spare parts set number
– Hardware revision code
3. Replace measuring electronics boards if
206
S: SAVE T-DAT
!: # 206
0x0F
BAD
Device Fail-
ure
Constant
Restore from T-
DAT failed
No.
Device status message
(local display)
PROFIBUS measured value status
Extended
diagnostic mes-
sage in the PRO-
FIBUS
master
Cause/
Rectification
Spare parts
→
102
Q
ual
ity co
de (HEX
)
M
ea
sured v
aria
b
le status
Qu
ality
sta
tus
Q
ual
ity
substa
tu
s
Li
mits
Содержание Proline t-mass 65 PROFIBUS DA
Страница 127: ...www addresses endress com ...