Endress+Hauser Proline t-mass 65 PROFIBUS DA, Руководство по эксплуатации

Страница: 41 / 127

Proline t-mass 65 PROFIBUS DP/PA Operation
Hauser 41
6.3.3 Disabling the programming mode
Programming mode is disabled if an operating element is not pressed within 60 seconds fol-
lowing automatic return to the HOME position.
Programming can also be disabled by entering any number in the "ACCESS CODE" function
(other than the customer's code).
6.4 Error messages
6.4.1 Type of error
Errors that occur during commissioning or measuring are displayed immediately. If two or
more system or process errors occur, the error with the highest priority is the one shown on
the display.
The measuring device distinguishes between two types of error:
•
System error
→ 
93:
This group includes all device errors, e.g. communication errors, hardware errors etc.
• Process error
→
100
This group includes all application errors, e.g. flow limit etc.
a0000991
Fig. 29: Error messages on the display (example)
1 Error type: P = process error, S = system error
2 Error message type:
$
= fault message, ! = notice message, definition
3 Error designation: e.g. FLOW LIMIT = maximum flow limit exceeded
4 Error number: e.g. #401
5 Duration of most recent error occurrence (in hours, minutes and seconds)
6.4.2 Error message type
The measuring device always assigns system and process errors which occur to two types of
error messages
(
fault or notice messages ) resulting in different weightings
→
92 ff.
Serious system errors, e.g. module defects, are always identified and classed as "fault mes-
sages" by the measuring device.
Notice message (!)
• The error in question has no effect on the current operation.
• Displayed as

Exclamation mark (!), error type (S: system error, P: process error).
• Displaying the device status on PROFIBUS DP/PA
→
93
Fault message ($ )
• The error in question interrupts or stops the current operation.
• Displayed as

Lightening flash (
$
), error type (S: system error, P: process error)
• Displaying the device status on PROFIBUS DP/PA
→
93
1
2 4 5 3
X X X X X X X X X X
#
0 0 0 0 0 : 0 0 : 0 5
P