Endress+Hauser Proline Promass 80S, Техническая информация

Страница: 49 / 54

Proline Promass 80S, 83S
Hauser 49
Pressure measuring device
approval
The measuring devices can be ordered with or without PED (Pressure Equipment Directive). If a device
with PED is required, this must be ordered explicitly. For devices with nominal diameters less than or
equal to DN 25 (1"), this is neither possible nor necessary.
• With the identification PED/G1/III on the sensor nameplate, Hauser confirms conformity
with the "Basic safety requirements" of Appendix I of the Pressure Equipment Directive 97/23/EC.
• Devices with this identification (with PED) are suitable for the following types of fluid:
– Fluids of Group 1 and 2 with a steam pressure greater than, or smaller and equal to 0.5 bar (7.3
psi)
– Unstable gases
• Devices without this identification (without PED) are designed and manufactured according to good
engineering practice. They correspond to the requirements of Art. 3, Section 3 of the Pressure
Equipment Directive 97/23/EC. Their application is illustrated in Diagrams 6 to 9 in Appendix II of
the Pressure Equipment Directive 97/23/EC.
Other standards and
guidelines
• EN 60529
Degrees of protection by housing (IP code)
• EN 61010-1
Protection Measures for Electrical Equipment for Measurement, Control, Regulation and Laboratory
Procedures
• EN 61508
Functional Safety of Electrical/Electronic/Programmable Electronic Safety-related Systems
• IEC/EN 61326
"Emission in accordance with Class A requirements". Electromagnetic compatibility (EMC
requirements)
• NAMUR NE 21
Electromagnetic compatibility (EMC) of industrial process and laboratory control equipment
• NAMUR NE 43
Standardization of the signal level for the breakdown information of digital transmitters with analog
output signal
• NAMUR NE 53
Software of field devices and signal-processing devices with digital electronics
Ordering Information
Detailed ordering information is available from the following sources:
• In the Product Configurator on the Hauser website: www.endress.com → Select country
→ Instruments → Select device → Product page function: Con fi gure this product
• From your Hauser Sales Center: www.endress.com/worldwide
Product Configurator - the tool for individual product configuration
• Up-to-the-minute configuration data
• Depending on the device: Direct input of measuring point-specific information such as measuring
range or operating language
• Automatic verification of exclusion criteria
• Automatic creation of the order code and its breakdown in PDF or Excel output format
• Ability to order directly in the Hauser Online Shop