Endress+Hauser Proline Promass 80S, Техническая информация

Страница: 13 / 54

Proline Promass 80S, 83S
Hauser 13
Maximum measured error Design fundamentals →  15
o.r. = of reading; 1 g/cm
3
= 1 kg/l; T = fluid temperature
Base accuracy
Mass flow and volume flow (liquids)
Promass 83S:
• ±0.10% o.r.
Promass 80S:
• ±0.15% o.r.
Mass flow (gases)
±0.50% o.r.
Density (liquids)
• Reference conditions: ±0.0005 g/cm
3
• Field density calibration: ±0.0005 g/cm 3 (valid after field density calibration under process
conditions)
• Standard density calibrations: ±0.01 g/cm 3 (valid over the entire measuring range of the sensor →
 19)
• Special density calibration: ±0.002 g/cm 3 (optional, valid range: +5 to +80 °C (+41 to +176 °F) and
0 to 2.0 g/cm

)
Temperature
±0.5 °C ± 0.005 · T °C (±1 °F ± 0.003 · (T - 32) °F)
Zero point stability
Flow values
Flow values as turndown parameter depending on nominal diameter.
SI units
DN Zero point stability
[mm] [in] [kg/h] [lb/min]
8 ³ ⁄ ₈ " 0.20 0.007
15 ½" 0.65 0.024
25 1" 1.80 0.066
40 1½" 4.50 0.165
50 2" 7.00 0.257
DN 1:1 1:10 1:20 1:50 1:100 1:500
[mm] [kg/h] [kg/h] [kg/h] [kg/h] [kg/h] [kg/h]
8 2000 200.0 100.0 40.00 20.00 4.000
15 6500 650.0 625.0 130.0 65.00 13.00
25 18000 1800 900.0 360.0 180.0 36.00
40 45000 4500 2250 900.0 450.0 90.00
50 70000 7000 3500 1400 700.0 140.0