Endress+Hauser Proline Promass 80S, Техническая информация

Страница: 17 / 54

Proline Promass 80S, 83S
Hauser 17
Orientation Make sure that the direction of the arrow on the nameplate of the sensor matches the direction of flow
(direction of fluid flow through the pipe.
Vertical (Fig. V)
Recommended orientation with upward direction of flow. When fluid is not flowing, entrained solids
will sink down and gases will rise away from the measuring tube. The measuring tubes can be
completely drained and protected against solids buildup.
Horizontal (Fig. H1, H2, H3)
The transmitter can be installed in any orientation in a horizontal pipe run.
When using a bent measuring tube and horizontal installation, the position of the sensor has to be
matched to the fluid properties!
a0004581
Horizontal installation for sensors with a bent measuring tube
1
Not suitable for fluids with entrained solids. Risk of solids accumulating.
2 Not suitable for outgassing fluids. Risk of air accumulating.
Orientation: Vertikal Horizontal,
Transmitter head
up
Horizontal,
Transmitter head
down
Horizontal,
Transmitter head
to the side
a0004572
Fig. V
a0004576
Fig. H1
a0004580
Fig. H2
a0007558
Fig. H3
Standard,
Compact version
 
1)
 
Standard,
Remote version
 
1)
 
 = Recommended orientation;  = Orientation recommended in certain situations;
 = Impermissible orientation
1)
To ensure that the maximum permitted ambient temperature for the transmitter is not exceeded, for low-
temperature fluids, we recommend the horizontal orientation with the transmitter head up (Fig. H1) or the
vertical orientation (Fig. V).
1
2