Endress+Hauser Proline Promass 80S, Техническая информация

Страница: 14 / 54

Proline Promass 80S, 83S
14 Hauser
US units
Accuracy of outputs
o.r. = of reading; o.f.s. = of full scale value
The output accuracy must be factored into the measured error if analog outputs are used, but can be
ignored for fieldbus outputs (e.g. Modbus RS485, EtherNet/IP).
Current output
Accuracy: Max. ±0.05 % o.f.s. or ±5 μ A
Pulse/frequency output
Accuracy: Max. ±50 % ppm o.r.
Repeatability Design fundamentals →  15
o.r. = of reading; 1 g/cm
3
= 1 kg/l; T = fluid temperature
Base repeatability
Mass flow and volume flow (liquids)
Promass 80S, 83S: ±0.05% o.r.
Mass flow (gases)
Promass 80S, 83S: ±0.25% o.r.
Density (liquids)
±0.00025 g/cm 3
Temperature
±0.25 °C ± 0.0025 · T °C (±0.45 °F ± 0.0015 · (T–32) °F)
Response time • The response time depends on the configuration (damping).
• Response time in the event of erratic changes in the measured variable (only mass flow): after
100 ms 95 % of the full scale value.
Influence of fluid
temperature
When there is a difference between the temperature for zero point adjustment and the process
temperature, the typical measured error of the Promass sensor is ±0.0002% of the full scale value / °C
(±0.0001% of the full scale value / °F).
DN 1:1 1:10 1:20 1:50 1:100 1:500
[in] [lb/min] [lb/min] [lb/min] [lb/min] [lb/min] [lb/min]
³ ⁄ ₈ " 73.50 7.350 3.675 1.470 0.735 0.147
½" 238.9 23.89 11.95 4.778 2.389 0.478
1" 661.5 66.15 33.08 13.23 6.615 1.323
1½" 1654 165.4 82.70 33.08 16.54 3.308
2" 2573 257.3 128.7 51.46 25.73 5.146