Micropilot M FMR250 FOUNDATION Fieldbus
Trouble-shooting
Hauser
87
9.7
Return
The following procedures must be carried out before a transmitter is sent to Hauser e.g.
for repair or calibration:
• Remove all residue which may be present. Pay special attention to the gasket grooves and crevices
where fluid may be present. This is especially important if the fluid is dangerous to health, e.g.
corrosive, poisonous, carcinogenic, radioactive, etc.
• Always enclose a duly completed "Declaration of contamination" form (a copy of the "Declaration
of contamination" is included at the end of this operating manual).
Only then can EHauser transport, examine and repair a returned device.
• Enclose special handling instructions if necessary, for example a safety data sheet as per
EN91/155/EEC.
Additionally specify:
• An exact description of the application
• The chemical and physical characteristics of the product
• A short description of the error that occurred (specify error code if possible)
• Operating time of the device
9.8
Disposal
In case of disposal please seperate the different components according to their material consistence.
9.9
Software history
9.10
Contact addresses of Hauser
Contact addresses can be found on our homepage "www.endress.com/worldwide". If you have any
questions, please do not hesitate to contact your Hauser representative.
Date
Software version
Changes to software
Documentation
09.2004
01.01.00
Original software.
Operated via:
– ToF Tool from version 2.0
– HART communicator DXR375
with Rev. 1, DD 1.
BA291F/00/EN/08.04
11.2005
01.04.00
• Function: detection window
• Communication: PROFIBUS PA
Operated via:
– ToF Tool from version 4.2
– FieldCare from version 2.02.00
– HART communicator DXR375
with Rev. 1, DD 1.
BA291F/00/EN/01.06
10.2006
01.05.00
Support of additional HF modules integrated.
• Communication: FOUNDATION Fieldbus
BA291F/00/EN/08.06
71030727