Endress+Hauser Gammapilot M FMG60 FOUNDATION Fieldbus, Руководство по эксплуатации

Страница: 42 / 104

Operation Gammapilot M FMG60 FOUNDATION Fieldbus
42 Hauser
+ -
PT100
IN CASCADE OUT
SIM WP
OFF
ON
3 4 5 6 7 8
9 10 11 12
+ - - +
0
13
2
SIM WP
OFF
ON
9 10 11 12
A0018671
Switch Position Meaning
SIM ON (down) Simulation possible in the configuration tool
OFF (up) Simulation not possible in the configuration tool
WP (write protection) ON (down) Parameters can only be read
OFF (up) Parameters can be written and read
Device identification
Foundation Fieldbus identifies the device by its physical device ID and automatically
assigns it an appropriate field address. The address is not set via hardware switches.
6.6.3 Network configuration
Prior to configuring the FF network, the device description (DD) of the Gammapilot M
must be downloaded to the directory provided for this purpose.
• Start the interface configuration tool
• Configure the interface
• Call the DD download routine
• Download the device descriptions (files with the extension .ffo and .sym) to the directory
proposed
• When the configuration is finished, close the tool and the FF stack (if open)
The device descriptions for the Gammapilot M device descriptions can be ordered directly
from Hauser or downloaded from our website " www.endress.com ". They contain
all the data needed to operate Hauser Foundation Fieldbus devices.
Example: Configuration using the NI-Fieldbus Configurator
Start the NI Fieldbus Configurator.
After startup, the Configurator shows the network configuration in the form of an
expandable tree. If the Gammapilot M has been connected correctly, it is now recognized:
E+H_GAMMAPILOT_M_XXXXXXXXXXX
Double-click the name to display the device data.
PD_TAG The physical name of the device
DEVICE_ID The unique device identifier
NODE_ADDRESS Device address (is automatically assigned by the Configurator; can be changed subsequently
by the user)