Endress+Hauser Gammapilot M FMG60 FOUNDATION Fieldbus, Руководство по эксплуатации

Страница: 49 / 104

Gammapilot M FMG60 FOUNDATION Fieldbus Operation
Hauser 49
6.6.7 Diagnostic block
E+H_GAMMAPILOT_M_XXXXXXXXXXX
.....TRANSDUCER_XXXXXX (TB)
.....
DIAGNOSTIC_XXXXXX (DIAG)
.....DISPLAY_XXXXXX (DISP)
Operation
The Diagnostic block contains the error messages of the device. These parameters can also
be read out and edited using the VU331 display module. The Diagnostic block is opened by
clicking the "Diagnostic" line. Parameter changes using the tool are made offline. The
device can remain in operation during this time.
The changes are downloaded to the device by first setting MODE_BLK = OOS and then
pressing the WRITE CHANGES button. If you want to check all the values saved in the
device, click READ ALL. To return to operation, set the MODE_BLK to AUTO.
3)
Block administration parameters
Parameter Description
MODE_BLK See the description under Resource block. The possible operating modes of the Transducer
block are:
• AUTO: the block is operating as normal
• OOS: the block is out of service
TAG_DESC User description of the intended application of the block
BLOCK_ERROR Shows the error status in conjunction with the block components
Out-of-Service: the block is in the OOS mode
Device-specific parameters
Parameter Posi-
tion
indica-
tor
Rel.
index Variable name Size[bytes] Type Read Write Storage
class
Present
error *A0 13 ACTUALERROR 2 UNSIGNED16 X Dynamic
Previous
error *A1 14 LASTERROR 2 UNSIGNED16 X Non-vol.
Clear last
error *A2 15 CLEARLASTERROR 1 ENUM8 X X Dynamic
Reset *A3 16 RESET 2 UNSIGNED16 X X Dynamic
Unlock
parameter *A4 17 OPERATIONCODE 2 UNSIGNED16 X X Non-vol.
Protocol
+SW No. *C2 18 PROSOFTVERSION-
STRING 16 VISIBLE
STRING X Constant
6.6.8 Display block
E+H_GAMMAPILOT_M_XXXXXXXXXXX
.....DIAGNOSTIC_XXXXXX (DIAG)
.....
DISPLAY_XXXXXX (DISP)
3) If it is not possible to set MODE_BLK to AUTO, an error has occurred. Should this happen, check all the parameters, make the necessary changes
and try to set MODE_BLK to AUTO again