Endress+Hauser Gammapilot M FMG60 FOUNDATION Fieldbus, Руководство по эксплуатации

Страница: 41 / 104

Gammapilot M FMG60 FOUNDATION Fieldbus Operation
Hauser 41
6.6 FOUNDATION Fieldbus interface
6.6.1 System architecture
The following diagram shows two typical examples of a FOUNDATION Fieldbus network
with the associated components.
E HAUSER
E + –
%
T T
1
2
3 4
7
8
9
5 6
10
11
A0018251
1 Fieldcare, Profiboard/Proficard
2 FF link
3 Micropilot M with display VU331
4 Prosonic M
5 Levelflex M
6 Gammapilot M
7 Commubox FXA291 with ToF Adapter FXA291
8 Computer with operating tool (e.g. FieldCare)
9 FHX40 with operating module VU331
10 VIATOR Bluetooth modem with connecting cable
11 Field Xpert SFX100
The system can be connected in the following ways:
• A linking device makes the connection to higher-level fieldbus levels (e.g. High Speed
Ethernet (HSE)) possible.
• A FOUNDATION Fieldbus-H1 connecting card is needed for direct connection to a
process control system.
Further information on FOUNDATION Fieldbus can be found in BA00013S/04/EN
"FOUNDATION Fieldbus Overview, Installation and Commissioning Guidelines", the
FOUNDATION Fieldbus Specification or on the Internet at "http://www. fieldbus.org".
6.6.2 Hardware settings
Two DIP switches in connection compartment 2 allow the hardware setting for write
protection and the simulation function. A diagram in the connection compartment
explains the position of the switches (ON and OFF)