Endress+Hauser gammapilot FTG 671, Руководство по эксплуатации

Страница: 31 / 64

3.3 Configuration with Commulog VU 260 Z
The Gammapilot FTG 671 can also be configured with the Commulog VU 260 Z handheld
terminal as shown in Figs 3.2, p. 24. A full description of Commulog operation is to be
found in Operation Instructions BA 028, Table 3.2 summarizes the key functions.
•
The tag numbers for the measuring point can be entered by calling up the VA fields
in the operating matrix.
BA082E26/27
Measured value
or parameter
Function keys
Matrix selection
keys
Commulog sockets
Green communications LED
•
LIghts when
Fig. 3.23:
Gammpilot FTG 671
Showing front panel and
Commulog VU 260 Z key
functions
Keys Function
Matrix selection
•
Select matrix position
•
»Escape key«, selects the position V0H0
•
Displays error message if diagnostics icon flashes
•
Press »Escape« to reset fault alarm and return to V0H0
Parameter entry
•
Calls the parameter entry mode
•
Quits parameter entry mode and registers the entered value
•
Select the digit to be changed: the selected digit flashes.
•
Enter the desired value: If the parameter is alphanumeric:
- The
⇑
key scans through all characters starting from
"-" through: 0,1,..,9,.,/,+, space, Z,Y,X,W,..
- The
⇓
key scans through all characters starting from
"-" through: A,B,..,Y,Z, space,+,/,.,9,8,...
•
Move the decimal point:
-
⇐
and
⇑
together to move left or
-
⇒
and
⇑
together to move right.
•
Restores original value and quits entry mode.
The Commulog stays at the selected matrix field.
+
+
Table 3.6:
Gammapilot FTG 671
Parameter entry and display
keys for Commulog VU 260 Z
Silometer FMC 672 Z/677 Z Chapter 3: Controls
29