Endress+Hauser gammapilot FTG 671, Руководство по эксплуатации

Страница: 29 / 64

3 Controls
This Chapter describes how the Gammapilot transmitter is operated. It is divided into the
following sections:
•
Commutec operating matrix
•
Configuration from the front panel
•
Configuration with the Commulog VU 260 Z
3.1 Commutec operating matrix
All functions, including the relay switch points are configured via the operating matrix,
see Figs 3.1 and 3.2:
•
Each field in the matrix is accessed by a vertical (V) and horizontal (H)
position which can be entered at the front panel of the FTG 671, by the
Commulog VU 260 Z and via a ZA 67
…
computer gateway.
•
For information on ZA 67
…
operation see the appropriate operating manual
and Technical Information sheet »Commulog Operating Program« TI 113.
A matrix card, reproduced at the back of this manual, is delivered with the Gammapilot
FTG 671 transmitter.
Current matrix position
Gammapilot display
Parameter at current matrix
position
Press simultaneously
to move to V0H0
Move H0
…
H9, H0
Move V0
…
V9, V0
BA082E24
Fig. 3.20:
Gammapilot FTG 671
Parameter matrix operation with
function of V and H keys.
The complete matrix has 10 x 10
fields, although not all are used
Diagnostics key -
press to display error
message when icon
blinks
Escape key - press to
move to field 00
Entry key - press to call
or quit parameter entry
Matrix selection keys -
press to move about matrix
BA082E25
Commulog
display
Parameter
Parameter description
Fig. 3.21:
Commulog display and key
functions.
The Tag No. is entered in the VA
level which can be accessed by
the Commulog or ZA 67
…
interface only
Silometer FMC 672 Z/677 Z Chapter 3: Controls
27