Endress+Hauser EngyVolt RV15 Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 64

background image

EngyVolt RV15

Commissioning

25

2. Press the   or   keys until RLY is displayed.
3. Press the   key. Initial display: "OP1", "kWh"
4. Press the   key again to assign the desired function to pulse output 1.
5. Use the   and   keys to choose from the following values: kwH (= use as pulse output for

kWh), kvarh (= use as pulse output for kvarh), NONE (= not used)

6. Press the key to confirm your selection.

"SET" is displayed. The device goes to the next parameter "OP2".

Relay output 2 - OP2

1. Call up the Setup menu.
2. Press the   or   keys until RLY is displayed.
3. Press the   key. Initial display: "OP1", "kWh"
4. Press the   key to switch to OP2. Initial display: "OP2", "kWh"
5. Press the   key again to assign the desired function to pulse output 2.
6. Use the   and   keys to choose from the following values: kwH (= use as pulse output for

kWh), kvarh (= use as pulse output for kvarh), NONE (= not used)

7. Press the key to confirm your selection.

"SET" is displayed. The device goes to the next parameter "RATE".

Pulse rate - RATE

This functions defines the pulse rate of

both

pulse outputs. Factory setting: "1"

1. Press the key.
2. Use the and keys to choose from the following values: 0.1 (= 1 pulse corresponds to

0.1 kWh / kvarh, 1 (= 1 pulse corresponds to 1 kWh / kvarh), 10 (= 1 pulse corresponds to
10 kWh / varh, 100 (= 1 pulse corresponds to 100 kWh / kvarh), 1000 (= 1 pulse corresponds
to 1

000 kWh / kvarh).

3. Press the key to confirm your selection.

"SET" is displayed. The device goes to the next parameter "PULS".

Pulse length - PULS

This function defines the length of a pulse. Values displayed are in the unit "ms". Factory setting:
"200"

1. Press the   key.
2. Use the   and   keys to choose from the following values: 60, 100, 200
3. Press the   key to confirm your setting.

"SET" is displayed. The device returns to the first menu level.

6.3.8

Setting the display of energy values – NRGY

This function specifies whether the energy values are displayed with the "k" or "M" sign (kWh &
kvarh or MWh & Mvarh).

1. Call up the Setup menu.
2. Press the   or   keys until NRGY is displayed.
3. Press the   key.
4. Use the   and   keys to choose from the following values: KILO (for kWh / kvarh), MEGA

(for MWh / Mvarh).

«
...
23
24
25
26
27
...
»

Содержание EngyVolt RV15

































































Отзывы:

Нет отзывов

Похожие инструкции для EngyVolt RV15

Blancett B3100 Series

Бренд: Badger Meter Страницы: 16

Бренд: Badger Meter Страницы: 26

Бренд: Badger Meter Страницы: 48

Бренд: F&F Страницы: 2

Бренд: Hammond Страницы: 130

Бренд: Ralston Instruments Страницы: 52

BLITZFIRE Series

Бренд: Task Force Tips Страницы: 20

Бренд: X-Rite Страницы: 45

Бренд: X-Rite Страницы: 22

Бренд: Kawai Страницы: 64

Бренд: Kawai Страницы: 28

Бренд: Kawai Страницы: 28

Бренд: Olimpus Страницы: 12

SignalHawk SH-36S-PC

Бренд: BIRD Страницы: 137

Бренд: OHAUS Страницы: 71

Бренд: Teledyne Lecroy Страницы: 4

Бренд: Alfa Laval Страницы: 18

Бренд: Interacoustics Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды