Endress+Hauser Deltabar PMD75B HART Скачать руководство пользователя страница 22

Страница: 22 / 80

Installation

Deltabar PMD75B HART

Hauser

5.2.10 Turning the display module

4 mm

A0038224

WARNING

Supply voltage switched on!

Risk of electric shock and/or explosion!

‣

Switch off the supply voltage before opening the measuring device.

1. If fitted: release the screw of the cover lock for the electronics compartment cover

using the Allen key.

2. Unscrew the electronics compartment cover from the transmitter housing and check

the cover seal.

3. Press the release mechanism and remove the display module.
4. Turn the display module to the desired position: maximum 4 × 90 ° in each direction.

Fit the display module on the electronics compartment in the desired position until it

clicks into place. Screw the electronics compartment cover back onto the transmitter

housing. If fitted: tighten the screw of the cover lock using the Allen key

0.7 Nm (0.52 lbf ft) ±0.2 Nm (0.15 lbf ft).

5.2.11 Closing the housing cover

NOTICE

Thread and housing cover damaged from dirt and fouling!

‣

Remove fouling (e.g. sand) on the thread of the cover and housing.

‣

If you continue to encounter resistance when closing the cover, check the thread again

for fouling.

5.2.12 Turning the housing

The housing can be rotated up to 380° by loosening the Allen screw.

Your benefits

• Easy mounting due to optimum alignment of housing

• Good, accessible device operation

• Optimum readability of the onsite display (optional)

A0043807

Содержание Deltabar PMD75B HART

















































































Результаты поиска

Содержание Deltabar PMD75B HART

Отзывы:

Похожие инструкции для Deltabar PMD75B HART

Бренды по названию

Популярные бренды

Endress+Hauser Deltabar PMD75B HART, Руководство пользователя

Результаты поиска

Содержание Deltabar PMD75B HART

Отзывы:

Похожие инструкции для Deltabar PMD75B HART

Бренды по названию

Популярные бренды