Endress+Hauser Ceraphant PTP31B, Руководство по эксплуатации

Страница: 54 / 92

Overview of the IO-Link operating menu Ceraphant PTC31B, PTP31B, PTP33B IO-Link
54 Hauser
14 Overview of the IO-Link operating menu
Depending on the parameter configuration, not all submenus and parameters are
available. Information on this can be found in the parameter description under
"Prerequisite".
Level 0 Level 1 Level 2 Level 3 Details
Identification Serial number -
Firmware version -
Extended Ordercode →  56
ProductName -
ProductText -
VendorName -
VendorText -
Hardware revision -
ENP_VERSION →  56
Application Specific Tag →  56
Device Type -
Diagnosis Actual Diagnostics (STA) →  56
Last Diagnostic (LST) →  56
Simulation Switch Output (OU1) →  56
Simulation Current Output (OU2) →  57
Simulation Switch Output (OU2) →  58
Device Search →  57
Parameter Application Sensor Operating Mode (FUNC) →  40
Unit changeover (UNI) →  58
Zero point configuration (ZRO) →  38
Zero point adoption (GTZ) →  38
Damping (TAU) →  60
Current output Value for 4 mA (STL) →  40
Value for 20 mA (STU) →  41
Pressure applied for 4mA (GTL) →  41
Pressure applied for 20mA (GTU) →  42
Alarm current (FCU) →  62
Switch output 1 Switch point value / Upper value for pressure window, output 1 (SP1 / FH1) →  63
Switchback point value / Lower value for pressure window, output 1 (RP1 /
FL1) →  63
Switching delay time, output 1 (dS1) →  67
Switchback delay time, output 1 (dR1) →  67
Output 1 (OU1) →  70
Switch output 2 Switch point value / Upper value for pressure window, output 2 (SP2 / FH2) →  65
Switchback point value / Lower value for pressure window, output 2 (RP2 /
FL2) →  65
Switching delay time, output 2 (dS2) →  68
Switchback delay time, output 2 (dR2) →  68
Output 2 (OU2) →  70