encor
etworks
TM
e n
!
•
For information on trademarks, safety, limitations
of liability, and similar topics, see
Notices
.
VSR-1200™ and RDU™ Installation and
Quick Configuration Guide
2
nd
of 2 QuickStart™ Guides for the VSR-1200™
his guide presents procedures for a standard installation of the VPN Satellite Router™ 1200
(VSR-1200™) in the BANDIT family.
Note:
The screens shown in this document are examples; the choices shown on your VSR-1200’s
menus depend on the features in the chassis and on the software version installed in the device.
(For figures, tables, and configurations not addressed in this Installation Guide, see the
Configuration
Module or the
BANDIT Products General Hardware Reference
Module.)
See the following sections:
•
Before Installation
•
Setting Up the Hardware
•
Logging In
•
Using the Main Menu
•
Configuring the Software
•
Saving (Writing) the Device’s Configuration
•
Restarting (Resetting) the Device
•
Exiting a Session
2.1
Before Installation
Gather all required information.
Before you start these procedures, make sure you have all the
information required to set up the VSR-1200 for use in your network—for example:
• The device’s IP address
• The device’s passwords
• The device’s VPN configuration, if any
• Interface requirements for the device’s ports
• Interface types for the ports—for example, DTE or DCE
T
Revision A, March 2010
© 2010 Encore Networks, Inc.
All rights reserved.
Home Module:
VSR-1200 Hardware Reference
Document 2
