emmeti ETI 2100, Инструкция по установке и эксплуатации

Страница: 4 / 35

GB
4
Directive 2012/19/EC (RAEE)
t the end of its operating life the UTA serie unit must be disposed according to the regulation in force in the installation country.
The units are manufactured with the following materials:
- Plates
- Copper – Aluminium - Stainless steel
- Polyester – Polyethylene - Fimbord - Plastic
This product is in compliance with the EU 2002/96/EC Directives. The symbol of the crossed-out rubbish bin shown on the appliance
indicates that at the end of its useful life, since it is handled separately from domestic waste, the product must be sent to a separate
waste collection centre for electric and electronic appliances or returned to the retailer at the moment of purchase of a new equiva-
lent appliance.
The user is responsible for sending the product to a suitable collection centre at the end of its life cycle. Proper separate collection for
subsequent recycling of the de-commissioned appliance, its handling and environmentally friendly disposal, helps to prevent possible
negative effects on the environment and public health and favours the recycling of the product’s manufacturing material. For more
detailed information about available collection systems, refer to the local waste disposal services or the shop where you bought the
appliance.
1. Foreword
In order to ensure safe, correct use of the unit, the installer, the
user and the maintenance technician are required to carefully
adhere to the provisions of this manual.
Keep this booklet in a dry place, to avoid damage to it, for at least ten
years, for possible future reference.
-
Carefully read all of the information in this booklet: they provide
important information on safe installation, use, and maintenance.
-
Pay particular attention to the instructions for use accompa-
nied by the captions “DANGER” or “ATTENTION”, since, if not
obeyed, they can cause damage to the unit and/or persons or
property.
- In the event of any problems not covered by this booklet, contact the
Technical Assistance Service in your area promptly.
- Make sure that this booklet always accompanies the unit.
- This booklet constitutes an integral and essential part of the product
and must be delivered to the user.
- In the event that the unit is sold, or transferred to another owner,
always make sure that the booklet accompanies the unit so that it can
be consulted by the new owner and/or by the installer.
-
The manufacturer declines all responsibility for damage arising
from improper use of the unit, or from a partial or superficial
reading of the information contained in the booklet.
- The technical data, the aesthetic characteristics, the components and
the accessories listed in this booklet are not binding. The manufac-
turer reserves the right to introduce at any time all the modifications
believed to be necessary for the improvement of its product.
- References to laws, standards or technical regulations cited are to be
understood to be for information only and to refer to their publication
date. The coming into force of new provisions, or of modifications to
those in force, shall not be a ground for obligation by the manufacturer
towards third parties.
- The manufacturer is responsible for the compliance of its product with
laws, regulations and standards of construction in force at the time
of marketing. Knowledge and observance of the legislative provisions
and standards applying to the design of the equipment, its installation,
use and maintenance are the exclusive responsibility, as regards their
respective capacities, of the designer, the installer and the user.
- ATTENTION! It is important to check that the design and the
installation conform to current standards (EN Standards, safety
rules and local regulations) and are approved, where applica-
ble, by the competent regulating bodies on the subject.