emmeti ETI 2100, Инструкция по установке и эксплуатации

Страница: 19 / 35

19 18
GB
29
Air intake filter cleaning
After a period of continuous operation and
in consideration of the concentration of
impurities in the air, or when you intend to
restart the system after a period of inactivity,
proceed as described.
Extraction of filter cells in the versions with fin
suction grille
- remove the front grille by lifting it slightly (fig.
29 ref. A) and rotate it until it is completely
out of its seat (fig. 29 ref. B);
- remove the filter (fig. 29 ref. C), pulling it
horizontally outwards (fig. 29 ref. D).
Cleaning filter media
- vacuum the dust from the filter with a vacuum
cleaner (fig. 31 ref. A)
- wash the filter (fig. 31 ref. B) under running
water, without using detergents or solvents,
and allow it to dry.
- Reassemble the filter on the fan coil (fig. 32
ref. A), paying particular attention to insert
the lower edge (fig. 32 ref. B) in its seat (fig.
32 ref. C).
A
B
C
D
- It is forbidden to use the
appliance without the mesh
filter.
- The appliance is fitted with a
safety switch that prevents
the fan from running without
the intake grid or if it is set
incorrectly.
- After cleaning the filter, check
that the intake grid is installed
correctly.
Complete the cleaning steps
- For the versions with a finned
grid, insert the two tabs (fig. 33
ref. A) into the relevant slots (fig.
33 ref. B), rotate it and engage it
with a slight knock on in the upper
part.
TIPS TO SAVE ENERGY
- Always keep the filters clean;
- keep doors and windows of the
rooms that are to be air-conditioned
closed as much as possible;
- in the summer, limit the direct
irradiation of the sunrays into the
areas that are to be air-conditioned,
as much as possible (use curtains,
shutters, etc.).